Selecting The Right Windows For Energy Efficiency

Selecting The Right Windows for Energy Efficiency

New window technologies have increased energy benefits and comfort, and have provided more practical options for consumers. This selection guide will help homeowners, architects, and builders take advantage of the expanding window market. The guide contains three
sections: an explanation of energy-related window characteristics, a discussion of window energy performance ratings, and a convenient checklist for window selection.

Selecting the right window for a specific home invariably requires tradeoffs between different
energy performance features, and with other non-energy issues. An understanding of some basic energy concepts is therefore essential to choosing appropriate windows and skylights. As illustrated on the following page, three major types of energy flow occur through windows:

(1) non-solar heat losses and gains in the form of conduction, convection, and radiation;
(2) solar heat gains in the form of radiation; and
(3) airflow, both intentional (ventilation) and unintentional (infiltration).

Insulating Value

The non-solar heat flow through a window is a result of the temperature difference between the indoors and outdoors. Windows lose heat to the outside during the heating season and
gain heat from the outside during the cooling season, adding to the energy needs in a home. The effects of nonsolar heat flow are generally greater on heating needs than on cooling
needs because indoor-outdoor temperature differences are greater during the heating season than during the cooling season in most regions of the United States. For any window
product, the greater the temperature difference from inside to out, the greater the rate of heat flow.

A U-factor is a measure of the rate of non-solar heat flow through a window or skylight. (An R-value is a measure of the resistance of a window or skylight to heat flow and is the reciprocal of a U-factor.) Lower U-factors (or higher R values), thus indicate reduced heat flow. U-factors
allow consumers to compare the insulating properties of different windows
and skylights.

The insulating value of a singlepane window is due mainly to the thin films of still air on the interior and moving air on the exterior glazing surfaces. The glazing itself doesnt offer
much resistance to heat flow. Additional panes markedly reduce the U-factor by creating still air spaces, which increase insulating value.

In addition to conventional double-pane windows, many manufacturers offer windows
that incorporate relatively new tech- nologies aimed at decreasing U-factors.
These technologies include low-emittance (low-E) coatings and gas fills. A low-E coating is a microscopically thin, virtually invisible, metal or metallic oxide coating deposited on a glazing surface.

The coating may be applied to one or more of the glazing surfaces facing an
air space in a multiple-pane window, or to a thin plastic film inserted between panes. The coating limits radiative heat flow between panes by reflecting heat back into the home during cold weather and back to the outdoors during warm weather. This effect increases the insulating value of the window. Most window manufacturers now offer windows and skylights
with low-E coatings.

The spaces between windowpanes can be filled with gases that insulate better
than air. Argon, krypton, sulfur hexafluoride, and carbon dioxide are among the gases used for this purpose. Gas fills add only a few dollars to the prices of most windows and skylights. They are most effective when used in conjunction with low-E coatings. For these reasons, some manufacturers have made gas fills standard in their low-E windows and skylights.
The insulating value of an entire window can be very different from that of the glazing alone. The whole-window U-factor includes the effects of the glazing, the frame, and, if present, the insulating glass spacer. (The spacer is the component in a window that separates glazing panes. It often reduces the insulating value at the glazing edges.)
Since a single-pane window with a metal frame has about the same overall Ufactor as a single glass pane alone, frame and glazing edge effects were not of great concern before multiple-pane, low-E, and gas-filled windows and skylights were widely used. With the recent expansion of thermally improved glazing options offered by manufacturers, frame and spacer properties now can have a more pronounced influence on the U-factors of windows and skylights.

As a result, frame and spacer options have also multiplied as manufacturers offer improved designs. Window frames can be made of aluminum, steel, wood, vinyl, fiberglass, or
composites of these materials. Wood, fiberglass, and vinyl frames are better insulators than metal. Some aluminum frames are designed with internal thermal breaks, non-metal components that reduce heat flow through the frame.

These thermally broken aluminum frames can resist heat flow considerably better than aluminum frames without thermal breaks. Composite frames may use two or more materials (e.g. aluminum-clad wood, vinyl-clad wood) to optimize their design and performance, and typically have insulating values intermediate between those of the materials comprising them. Frame geometry, as well as material type, also strongly influences thermal performance properties.

Spacers can be made of aluminum, steel, fiberglass, foam, or combinations of
these materials. Spacer thermal perfor- mance is as much a function of geometry as of composition. For example, some well-designed metal spacers insulate almost as well as foam.

The table on page 3 shows representative U-factors for window glazing, frame, and spacer combinations under winter design conditions. Due to their orientation and their greater projected surface areas, domed and other shaped tilted and horizontal skylights have significantly higher U-factors than do vertical windows of similar materials and opening sizes.


Comments are Closed