Myths and Misconceptions about Saving Energy at Home
In spite of rapidly increasing bills, many people are still spending more than they need to on their utilities. More often than not, this is due to careless habits and a number of common myths and misconceptions about saving energy. The following seeks to dispel some of these misunderstandings in order to help you cut down on your electricity consumption significantly.
Appliances which Are Turned Off Consume No Energy
The reality is, that if an electrical appliance is turned off, it will usually still be drawing some power unless it is disconnected from the power socket entirely. Some appliances even draw as much energy when they are supposedly switched off as they do when they are actually in use. A great deal of modern household appliances ranging from televisions to computers have a standby mode. While on standby, such appliances may consume less power, they are consuming something nonetheless. Save energy by ensuring that devices are switched off at the power strip or unplugged entirely. Likewise, unplug mobile phone and laptop chargers when they are not in use, since they will continue to draw power otherwise.
Fluorescent Lights Are Unsightly, Inefficient Strip Lights Often Found in Offices
While this is partly true, modern fluorescent lightbulbs are actually extremely energy-efficient, consuming around a fifth of the amount of power as the traditional incandescent lightbulb. They might be more expensive and take a short time to reach full brightness once switched on, but changing all of the lighting fixtures in your home or office will make a very significant saving on your electricity bills. These bulbs fit into the same sockets as any other standard bulb. Also, fluorescent lightbulbs last, on average, about ten times longer.
Maintaining a Constant Temperature with Your Thermostat is More Efficient
The cost of heating a home normally accounts for the majority of a household’s utility bills. However, many people assume that keeping the thermostat on a constant temperature throughout the day and night is more energy-efficient than turning it down during the night and up during the day. In reality, the opposite is usually the case, and it is typically much more energy-efficient to have your heating on at a slightly higher temperature for several hours per day at two or more separate intervals. Additionally, lowering your thermostat temperature by one or two degrees makes little different to the ambient temperature while cutting energy consumption by as much as ten percent.
Setting Your Boiler to a Higher Temperature Will Make It Heat Water Faster
This is simply not true, since it will take the same amount of time for the boiler to reach a set temperature regardless. If you set your hot water boiler to ninety degrees, it will still take the same amount of time to reach seventy degrees, which is normally an optimal temperature for most requirements. Setting it higher simply wastes money by heating water more than necessary. The same applies to air conditioning units and central heating systems.